Electrodeposition diamond blade EY
Thanks to an original process that electrodeposits diamond grains without gaps, smooth cutting performance can be maintained for an extraordinarily long period.
･Because of the ultra-thin profile that lowers cutting resistance, workability is considerably enhanced. Also, environmental-friendliness is improved by dust reduction.
･The multiple segment type that allows good heat radiation enables continuous cutting work.
･Featuring high cutting accuracy, dust reduction and fine cut surfaces, thus, repair work is not required.
Use/Application
･A dedicated too・For ceramic siding. However, the following materials can be cut:
Hard, brittle materials (marble, slate, etc.) FRP, CFRP, resin materials (polyester resin, phenolic resin, melamine resin, epoxy resin, hard PVC, etc.)
Specifications
| EY80 |
70g |
80mm |
1.3mm |
2mm |
20mm |
19000(min-1(rpm)) |
open price |
Accessory ring hole diameter： φ15 mm |
| EY105 |
90g |
105mm |
1.3mm |
2mm |
20mm |
14500(min-1(rpm)) |
open price |
Accessory ring hole diameter： φ19･15 mm |
| EY125 |
110g |
125mm |
1.3mm |
2mm |
20mm |
12200(min-1(rpm)) |
open price |
Accessory ring hole diameter： φ19 mm |
| EY160 |
240g |
160mm |
1.8mm |
2mm |
20mm |
9500(min-1(rpm)) |
open price |
Accessory ring hole diameter： φ19 mm |
| EY180 |
300g |
180mm |
1.8mm |
2mm |
20mm |
8400(min-1(rpm)) |
open price |
Accessory ring hole diameter： φ19 mm |
IMPORTANT SAFETY INSTRUCTIONS
・Before using this product, be sure to read the instruction manual included with the product, instructions indicated on the case and the operation manual for the machine being used, to understand the contents thoroughly.
・Be sure to properly attach the protective cover (wheel guard) specified by the machine manufacturer.
・Never attempt to use the cutting wheel for zigzag cutting, curve cutting, oblique cutting (without using a guide), or prying work. Also, never attempt to use the side face of the wheel.
・Be sure not to touch a rotating wheel with hands or contact it with any part of the body.
・During work, be sure to wear protective gear (dust-proof goggles, safety shoes and protective cap).
・Otherwise, if the wheel is damaged, chips may directly strike the user’s body, causing serious injury.
・During work, be sure to wear protective gear (dust-proof mask and ear plugs).
・Otherwise, inhalation of dust may cause damage to the respiratory organs (throat, lungs, etc.), and the loud sound may cause hearing disorders.
CAUTIONS ON INSCRIBED VALUES
※ Since dimensions, weights, etc. are nominal, there possibly are changes of some numerical values.
※ Specifications may be changed for improvement of the product without prior notices.
※ Listed prices do not include VAT. Please ask our distributor in case of purchases.